Solar Products

Wall Mountable PCU - NANLA

Unexpected power cuts and power fluctuations can become regular experiences as it reduces your machine's efficiency, automatically putting you at a tough situation. by Vitronics Controls come as your unwaving power companion and a one stop solution to a stable power backup system. As a stylish wall mounted smart power backup, Nanla embraces the best of two worlds by powering your indoors through the usage of grid and abundant solar power. The solar energy stored provides constant and clean power that makes for adequate and efficient energy availability.

Download Brochure

LifePO4 battery cells integrated in Solar PCU powers safe homes & proves as an bliss by saving 25% more energy than lead acid battery. With its in-built battery management system & safely mechanism against surge and short circuit protection.

The life cycle of these batteries are up to 10 years followed by no water top-up and zero maintenance. Welcome to the brighter side of thing! Wall mounted smart power backup Nanla endlessly power flow through the usage of grid and abundant solar power. Absolute brightness for all times is what Solar PCU brings to you. Bring your unwavering power companion home to experience a power house connectivity.

Protection

  • Battery deep discharging
  • Battery over charging
  • Short Circuit
  • Over Temperature
  • Battery / PV reverse protection

Display

It incorporates 2 line LCD to showing following parameters:

  • Company Name
  • Battery Status
  • PV Voltage
  • PV Current
  • KWHD (Kilo wa hour in a day)
  • KWH in a month
  • Battery Voltage
  • Battery Current

Features

  • Fuse provided to protect short circuit condition
  • System in-built protection against battery over-charge & deep discharge
  • In-built blocking diode provided to prevent reverse flow of current through PV module
  • It has high efficiency SMPS charger. It implements a smart maximum peak power tracking (MPPT) algorithm that tracks the peak power point of a solar panel, irrespective of operating conditions
  • Normal battery voltage base controls also protect battery along with SOC controls
  • It runs Periodic Finishing loop for better charging
  • It implements a low battery disconnect feature to prevent the battery from discharging below a certain charge state
  • Battery Voltage settings are optionally temperature compensated thermistor based temperature sensor supported
  • Maintains Solar Energy Meter for solar energy produced in a day & for last 30 days
  • Last Fault Display and record
  • Highest charging current 20 amps (30 Amps on request)
  • Apatent ALR (Adaptive Loss Reduction) process gives more efficient charging system
  • In built SBM (Smart Battery Management) system provides higher degree of battery protection and life
  • 5-stage battery charge control system for lower gassing and faster Charging
  • Increase life of battery by:
    • Using Battery State of Charge SOC% for controlling depth of discharge.
    • SOC controls are factory adjustable
  • Higher Ruggedness: gives higher degree of protection to the card from REVERSE PHASE and BATTERY LOOSE connections

Specifications:

Parameter NANLA 800VA NANLA 1500VA
Rated Voltage 12V 24V
Rated Current 30 AMP 60 AMP
Charge Controller Technology MPPT MPPT
Battery Charging Voltage 13.7 V (Factory Settable) 27.4 V (Factory Settable)
Battery Low Disconnect 9.5 V(Factory Settable) 19 V(Factory Settable)
Over Charge Cut-off Voltage 14.2 V (Factory Settable) 28.4 V (Factory Settable)
Fuse Rating 30A 30A
Panel recommended 380 W 800 W
Suitable Batteries 12 V 50 AH LifePO4 24 V 50 AH LifePO4
Other
Operating Temperature 0°C to 55°C
Weight 20 K gms(approx.) 30 K gms(approx.)
Output
DC Output 3 DC Output 20 W | For tube and Fan.
2 USB Port total 100W
AC Output 230 V 800 VA 230 V 1500 VA

*Due to continous improvements actual specifications may change without prior notice

Download Brochure